Restored Thorens TD160 Turntable Limited Edition Flight Green Metallic

Description

Restored Thorens TD160 Turntable Limited Edition Flight Green Metallic
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
RESTORED and MODIFIED by ART-AND-SOUND
Restored 160
in flight green metallic
Designer piece - design product - дизайнерский продукт
WITH A COMBAT WEIGHT OF OVER 10 KG !!!
Our turntables are lovingly assembled, modified and assembled by hand.
Each of them is unique and differs in model, color or veneer grain.
The high-quality cases are restored or newly made by skilled craftsmanship.
Electrical components are checked,
Moving parts oiled and wear parts replaced.
A final endurance test rounds off the complex work
.
The customer receives a top-class device.
The
phonograph
works with
220V /
50Hz.
For shipping to the USA the turntable is converted on 110V / 60Hz.
Item Description:
Limit switch-off:
No
Inner plate:
metal
Bearing mandrel:
10mm
Basic dimensions:
Width: 45cm, depth: 36cm, height about 18cm
The case:
The housing consists of 25mm MDF side panels and a 16mm thick base of the same material.
It is very complex with several layers of metallic paint
Sealed and polished with appropriate intermediate sanding
. The connection panel for all necessary cable connections is located on the rear.
Faceplate:
Cover plate made of 1mm aluminum with metallic paint in flight green metallic
The Ortofon OM10 pickup:
With the OM series, Ortofon has long since created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry system for turntables in the medium price range.
Ortofon's OM range is mutually compatible. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next earpiece needle insert.
The audio cable:
Branded cables from "Oehlbach".
Pre-assembled analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures a true-to-life signal transmission. Contact security and corrosion protection is guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and three-dimensionality.
The turntable:
The turntable is made in five complex and time-consuming steps
polished to a high gloss.
The high-gloss polish gives your turntable a unique look.
With surface sealing through a special protective coating, against repeated tarnishing and for a long-lasting shine.
Chromed stainless steel spikes
:
So that the turntable is decoupled from low-frequency vibrations,
the chassis is equipped with height-adjustable spikes. This effectively prevents resonances and feedback.
The drive belt:
The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions).
New stainless steel record weight:
With a weight of 310g it ensures that the record lies smoothly on the plate and runs smoothly. This record weight plays in the middle "weight class. It builds up just enough weight to dampen the vibrations of the plate without stressing the bearing bushes. The suspension of the Thorens sub-chassis has been adjusted accordingly. By using it, you increase the sound performance of your system.
The following
Parts
are
as
Accessories
ö
r
received
Ä
literally
and
Not
component
this
auction
:
Hood small
(to be placed on the frame
): eBay
-
item number
112401191474
Hood big
(to be placed on the substructure):
eBay
-
item number
112411582098
The
following
parts
are
available
as
accessories
other
not
included
in
this
auction
:
Hood small
(to put on the housing):
german eBay
-
article
number
is
112401191474
Hood large
(to put on the base):
german eBay
-
article
number
is 112411582098
Cartridge MM systems including installation:
Branded cables from "Oehlbach". Pre-assembled analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures a true-to-life signal transmission. Contact security and corrosion protection is guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and three-dimensionality. With a weight of 310g it ensures that the record lies smoothly on the plate and runs smoothly. This record weight plays in the middle "weight class. It builds up just enough weight to dampen the vibrations of the plate without stressing the bearing bushes. The suspension of the Thorens sub-chassis has been adjusted accordingly. By using it, you increase the sound performance
Antriebstyp
Riemenantrieb
Marke
Thorens - Restauriert von Art-and-Sound
EAN
Nicht zutreffend
Modell
TD 160
Herstellernummer
nicht zutreffend
Herstellungsland und -region
Deutschland