-40%
Pro-Ject Debut Carbon Evolution High Gloss White Turntable
$ 263.47
- Description
- Size Guide
Description
OneCall eBay TemplateProduct Description:
The Evolution
Building a great high–end turntable requires design expertise. Building a great & affordable turntable requires not only expertise, but also skilled engineering, flawless manufacturing, advanced material sciences, and relentless passion. Creating a worthy successor to the legendary Debut Carbon required rethinking and reevaluating every component and each design choice. The new Debut Carbon EVO represents the epitome of Pro–Ject’s philosophy: high performance, clean aesthetics, and superb value. The elegant, simple aesthetic is unmarred by gimmicky lights, sliders, and buttons. It is a pure, high–performance turntable. Should requirements call for a phono preamp, Bluetooth or digital connectivity, USB interface, etc., we offer a wide range of external electronics, optimized for any application.
Good Vibrations – From the Record to You
Vinyl playback starts with the cartridge, converting what’s in the three–dimensional record groove to an electrical signal. The new Sumiko Rainier phono cartridge combines superb trackability with uncanny accuracy and clarity without sacrificing smoothness. Factory mounted and aligned on an 8.6″ low–mass carbon fiber tonearm, the Rainier offers a replaceable stylus that can be easily upgraded to a Sumiko Olympia (or even a Moonstone!) in a matter of seconds. No need to replace the cartridge, reset the alignment nor rebalance the tonearm. The signal from the Rainier is transmitted via a single run of high quality copper wiring direct to high quality RCA connectors with a completely separate ground, preserving the balanced signal from the cartridge output. The Debut Carbon EVO is supplied with our Connect It E: a semi–balanced, low–capacitance cable with superior shielding designed specifically to carry the delicate phono signal.
Modern Materials Meet Mass
The main platter upon which the record is played should be heavy and non–resonant. The Debut Carbon EVO approaches this problem by using our proven 12” steel platter, now lined around the outer edge (bottom side) with an anti–resonant thermo–plastic elastomer (TPE). The result is a heavier platter with minimal noise over an expertly engineered main bearing and sub–platter. The added rotational mass enhances the flywheel effect, yielding reduced wow & flutter and higher stability while damping resonance.
A Stable Stance
The Debut Carbon EVO benefits from the huge range of higher–level design elements Pro–Ject has to offer, incorporating the special TPE–damped metal feet from our award winning X1 turntable. Not only do the vibration–absorbing feet help isolate the turntable, they are easy to adjust and leveling the turntable is now as simple as can be. A perfectly leveled, solid & stable platform is crucially important for proper vinyl playback.
Vibes We Don’t Want to Hear
Motors vibrate. That is a challenge for any turntable designer to overcome as those vibrations can transfer to the tonearm and cartridge, negatively affecting sound quality. The Debut Carbon EVO features a new motor suspension system, decoupling the motor from the plinth to reduce the transfer of vibration. The only vibes we want are in the record grooves. Leveraging advanced damping solutions with high–mass composite construction, we created the new motor suspension system using a steel plate and TPE decoupling to isolate the motor while ensuring the spindle is perfectly aligned with the sub–platter for impeccable speed stability and smooth transfer of rotational force.
No Need to Watch Your Speed
Many turntables utilize AC motors that rely on your power line to maintain the correct speed. Many are so erratic they have to provide speed–control which needs to be monitored and adjusted over time. Some high–end designs offer an additional, usually expensive external power controller to stabilize speed. The Debut Carbon Evolution implements a sophisticated onboard power control circuit that generates a very precise signal to ensure accurate and consistent speed regardless of power fluctuation. There’s no need for adjustment nor gimmicky lights and sliders. You can simply rely on spot–on accuracy. Given the increasing popularity of 9″ and high–quality 45rpm records (due to their superior sound quality), we have incorporated electronic speed switching on the EVO. The speed selector switch is cleverly integrated with the power switch under the front left corner, which also maintains the sleek ergonomic design the Debut is known for.
Time for Evolution
The heavy, solid MDF plinth is painstakingly layered with eight coats of paint, available in finishes that look and feel luxurious. Debut Carbon EVO is crafted in traditional high–gloss black, white and red as well as in beautiful satin finishes including new soft pastel colors and a real walnut veneer. The engineering and manufacturing are the culmination of decades of know–how, investment, and passion. We build our products for the love of music, knowing that they might be handed down to future generations along with lovingly curated record collections. We have taken our most beloved turntable design and improved nearly every aspect of it. The result is an incredibly refined product with a price/performance ratio that sets a new standard.
Specifications:
Turntable Specs
Speed:
33, 45/(78)rpm (electronic speed change)
Drive principle:
belt drive, electronic speed control
Platter:
11.81", 3.75 lbs. steel
Platter damping:
TPE damping ring and felt mat
Main bearing:
stainless steel, brass bushing
Wow & flutter:
33: +/–0.19%; 45: +/–0.17%
Speed drift:
33: +/–0.6%; 45: +/–0.7%
Signal to noise:
68dB
Tonearm:
8.6″ carbon fiber one–piece tonearm tube
Effective arm length:
8.6"
Effective arm mass:
.01 lbs.
Overhang:
.73"
Included accessories:
15V DC / 0.8A power supply, dust cover
Power consumption:
4W / 0W standby
Dimensions (W x H x D):
16.34 x 4.45 x 12.60"
Weight:
13.23 lbs. net
Sumiko Rainier Cartridge Specs
Frequency range:
12–25,000Hz
Channel separation:
25dB/1kHz
Output voltage:
5mV
Recommended load impedance:
47kohms (MM input)
Compliance/stylus type:
10µm/mN – elliptical
Recommended tracking force:
20mN
Weight:
.01 lbs.
What's In The Box:
Debut Carbon EVO turntable
Sumiko Rainier phono cartridge (mounted & aligned)
Adjustable acrylic dust cover
Drive belt for 33 1/3 & 45rpm
Drive belt for 78rpm
Adapter for 7″ singles
Connect It E phono cable with external ground wire
Felt record mat
Multi–voltage power supply
Product Documentation
Warranty:
2 Years Parts / 2 Years Labor -Carry In Service
Shipping
We currently only offer shipping to the Contiguous United States. We do not ship to Alaska and Hawaii or Puerto Rico.
We do not ship to P.O. Boxes, APO or FPO addresses at this time.
You can count on OneCall to get your package there safe and on time. OneCall offers a variety of delivery choices for shipments to physical addresses anywhere in the contiguous United States. Not all delivery methods are available to all areas. So, call us toll free if you have a critical delivery need. We'll help you select the best shipping option.
Standard (via Ground Shipping):
Estimated delivery = 4-7 business days
Expedited Shipping (via 3-Day Shipping):
Estimated delivery = 3 business days
1-Day Shipping (via Overnight Shipping):
Estimated delivery = 1 business days
Freight (via Truck Carrier):
Estimated delivery = 7-14 business days
Please note:
Orders are processed Monday - Friday.
** Estimated delivery times based on in-stock inventory. Delays in processing and shipment may occur due to credit card decline, invalid information, weather or other causes outside our control. Oversized items (such as large televisions & tower speakers) ship via motor freight to the 48 contiguous states only. If a product is over 0, OneCall requires a signature when your package is delivered.
This is a safety measure designed to ensure that you receive your order. For example, if your package is simply left outside without your signature, the potential for loss increases considerably.
Why Buy from OneCall
Expert Advice
Our Spokane, WA, call center staff is highly trained, experienced and non-commissioned. At OneCall we pride ourselves on being able to answer all your questions about technology, product compatibility, quality, performance, connectivity and much more.
Award-Winning Customer Service
At OneCall, we're committed to exceeding our customers' expectations - and that's earned us high marks from several major publications and retailer rating websites.
Quick Shipping
OneCall uses FedEx Ground and USPS as our standard shipping method, and we process orders as late as 2 p.m. Pacific Time, so most orders ship the same day. Oversized items, such as large TVs and certain speakers, ship via motor freight and are strapped to individual custom pallets and monitored with ShockWatch™ devices.
Payment
State sales taxes apply in:
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington DC, West Virginia, Wisconsin and Wyoming.
Returns
Return of New & Original Condition Items
Return of Defective Items
Special TV Instructions
Some Items we Sell Are Not Returnable
Please Note: All Returns are initiated through eBay
If you need to return your item you must request a return from your order in your eBay account.
Customer Service
If you call OneCall after business hours, you may leave a message. If requested, call backs will be made the next business day.
Hours
Monday-Friday: 6 a.m. to 6 p.m. Pacific
Saturday: Closed
Sunday: Closed
When you contact OneCall after business hours, a representative will respond the next business day