Music Hall ikura 2-Speed Belt-Driven Turntable with DV KARAT 17D3 MC Cartridge

Description

Includes
Music Hall ikura
Turntable
DV KARAT 17D3 MC Cartridge
Aftermarket Power Supply
Turntable Weight Record Stabilizer
Soft felt mat
Dust cover
Details
Music Hall ikura
Turntable
Split-plinth construction with vibration-isolating conical rubber cones for quieter performance
MDF platter with soft felt mat
One-piece aluminum alloy tonearm with Swiss-made ABEC 7 stainless steel bearings for superior rigidity and low resonance
Tonearm offers adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge flexibility
Teflon sheathed stainless steel main bearing for smooth, quiet platter rotation
Separately isolated DC synchronous motor for reduced vibration and noise
Vibration-damping adjustable feet
Low-noise fully manual belt-drive design
33-1/3 and 45 rpm speeds (manual speed change)
Speed variance: ±0.9%
Wow and flutter: ±0.15%
Rumble (max): greater than -70dB
High quality gold RCA connectors and detachable phono cable
External power supply reduces likelihood of electro-mechanical interference
18-1/4"W x 5-1/2"H x 13-1/4"D (with dust cover closed)
Requires a phono preamp or phono input on receiver or preamplifier
DV KARAT 17D3 MC Cartridge
Low output moving coil cartridge with flux damper and softened magnetism
Output Voltage: 0.3mV (at 1KHz, 5cm/sec.)
Channel Separation: 25 dB (at 1KHz)
Channel balance: 1.0 dB (at 1KHz)
Frequency response: 20 - 20,000Hz (± 1dB), 20 - 100,000Hz
Compliance: 15 x 10-6 cm/dyn
Tracking force: 1.8 - 2.0grams
DC resistance: R=38 ohms
Recommended load resistance: > 100 ohms
Cantilever: 1.7mm length, 0.25dia solid diamond
Stylus Type: Micro-Ridge
Weight: 5.3 grams
Good cosmetic and working condition
Some wear was difficult to capture in pictures
Scratches, scuffs, marks, dust, etc.
**Wear/tear is damage that naturally and inevitably occurs because of normal wear or aging