-40%
BEARING for OTC hub tamer forcing screw 503052 Saves washers, nut 311881 & more
$ 6.33
- Description
- Size Guide
Description
Bearing Fits The OTC Hub Tamer and Hub Tamer Elite. (&other tool sets with 3/4 forcing screw or shaft) FORCING SCREW NOT INCLUDED BEARING(S) ONLY!On the OTC hub tamer, The forcing screw does not come with a bearing. They want you to use flat washers on the forcing screw which works fine if everything comes out easily BUT if the bearing comes out difficult the washers will crush / grind into the surfaces of the forcing screw and destroy(s) the cups and the cones that the tool set comes with causing expensive tool replacements.
This bearing effectively solves that issue.
The bearing is heavy duty and is designed for pressing applications.
Bearing is 3/4" I.D. 9/16" thick and approx 1 11/16" O.D.
Thick carbon grade tool steel for enhanced durability
Can be used in other forcing screw pressing operations where the forcing screw is 3/4" or smaller.
Please note this bearing will need to be replaced from time to time. They do last a very long time and are heavy duty but it will depend on how you use it (Impact gun etc..) and the difficulty of the bearing and or pressure required. (4 pack recommended)
4 Pack, Save .00 ! (recommended if shop with volume of wheel bearing repairs)
Liability and risk information -
Pressing anything always presents a risk, those risks increase as pressure increases. User assumes all risk in the use of this item and is solely responsible for taking precautions to ensure safety of themselves and others. User should properly inspect this item before, during and after use for safety concerns.
Use this tool addition at your own risk and be aware that it is not endorsed or recommended by OTC, User assumes all risk in using this item for purpose stated in this ad or for any other purpose. Also due to the nature of the item we do not offer a warranty on this product.
Copyright 2019 Factory Service Tools